Maxair CAPR - CAPR Systems; Systems and System Components

Page 17 P/N 03521015 Rev Q
ITEM O.N. NIOSH P/N DESCRIPTION
CA-CAPR-36
1 2081-03
03531001 Blower Assembly
03531021 Liner
01031269 Cage
2590-05 Power Cord
Helmet Assembly
2 2500-36TSC 01532104 Li-Ion Battery
3 2000-76 2000-76 Battery Belt
4 2600-01 01432089 Li-Ion Battery Charger
CA-CAPR-37
1 2081-03
03531001 Blower Assembly
03531021 Liner
01031269 Cage
2590-05 Power Cord
Helmet Assembly
2 2500-37TSC 01532161 Li-Ion Battery
3 2000-76 2000-76 Battery Belt
4 2600-01 01432089 Li-Ion Battery Charger
CA-CAPR-30
1 2081-03
03531001 Blower Assembly
03531021 Liner
01031269 Cage
2590-05 Power Cord
Helmet Assembly
2 2500-30TSC 01532116 Li-Ion Battery
3 2000-76 2000-76 Battery Belt
4 2600-01 01432089 Li-Ion Battery Charger
Systems are congured from four main components, a Helmet, a Battery, a Battery Belt, and a Battery Charger.
● One Belt and one Charger are common to all systems.
● Three Battery choices are available, including -
■ 2500-36TSC - typically 8-10 hours/charge
■ 2500-37TSC - typically 12-15 hours/charge
■ 2500-30TSC - typically 16-20 hours/charge
● Three Helmet Assembly choices are available, including -
■ 2081-03 - the standard CAPR Helmet Assembly for general Cu󰀨, Shroud, and Hood Congurations.
■ 2082-03 - for congurations utilizing the Quick Cu󰀨.
■ 2083-03 - for congurations utilizing the 2061-04A Hard Hat.
The choice of Helmet and Battery determine which Head/Face Covers are available to a specic System
3.3 CAPR Systems
3.3.1 Systems and System Components
Table 3. SYSTEMS and their COMPONENTS