Maxcess FIFE-500 MAX - 4.3.3 CONTROL OUTPUTS

www.maxcess.com
FIFE-500 MAX Narrow Web Guide
MI 2700XXXXX 18
CHAPTER 4
CONTROL OUTPUTS
35 / 77
4.3.3 CONTROL OUTPUTS This screen contains buttons to test
the output signals. Each signal can be individually set or
cleared. Changes made in this screen are temporary, so the
outputs resume their normal operation when exiting this
screen. This menu is immune from menu timeouts.
Navigation:
MANUAL / SERVO-CENTER / AUTOMATIC
SETUP
SERVICE
CONTROL
OUTPUTS
Press OK to close this window.