Maxcess FIFE-500 MAX - CHAPTER 2 SAFETY INSTRUCTIONS; 2.1 Instructions for use; 2.2 Symbols used

www.maxcess.com
FIFE-500 MAX Narrow Web Guide
MI 2700XXXXX 18
CHAPTER 2
SAFETY INSTRUCTIONS
3 / 77
2. Safety Instructions
2.1 Instructions for use
To ensure safe and problem free installation of the FIFE-500 MAX
web guiding system, the web guiding system must be properly
transported and stored, professionally installed and placed in
operation. Proper operation and maintenance will ensure a long
service life of the device. Only persons who are acquainted with the
installation, commissioning, operation and maintenance of the
system and who possess the necessary qualifications for their
activities may work on the web guiding system.
Note: The safety information may not be comprehensive.
Please note the following:
 The content of these operating instructions
 Any safety instructions on the device
 The machine manufacturer’s specifications
 All national, state, and local requirements for
installation, accident prevention and environmental
protection
Information about
safety instructions
The safety instructions and symbols described in this
section are used in these operating instructions. They are
used to avoid possible dangers for users and to prevent
material damage.
SIGNAL WORD
Source of danger and its results
Avoiding dangers
The signal word DANGER refers to the danger of death or
serious bodily injuries.
The signal word WARNING refers to the danger of moderate
to severe bodily injuries.
The signal word CAUTION refers to the danger of slight to
moderate bodily injuries or material damage.
The signal word NOTICE refers to the possibility of damage to
equipment.
2.2 Symbols used
The following safety identification symbols are used in these
operating instructions.
WARNING /CAUTION-DUE TO ROTATION ROLLING
Reference to danger of injury caused by rolling.