11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
32
MOUNTING GUSSETS POSITIONED ON LONG SILL
FIG. 32-1
LONG SILL
TRUCK CHASSIS
STEP 1 - INSTALLING LIFTGATE ON TRUCKS - Cont’d
NOTE: For clarity Liftgate is not shown in the illustrations below..
MOUNTING GUSSETS POSITIONED ON TRUCK CHASSIS
FIG. 32-2
LONG SILL
TRUCK CHASSIS
2. Refer to the correct bed height and clearance dimensions
of the truck (TABLE 30-1) to determine if Liftgate installa-
tion plates and gussets should be welded to the truck chas-
sis or long sill under the truck body (FIGS. 32-1 or 32-2).
The height of the plates and gussets must provide suffi cient
clearance between the Liftgate, the underbody, and the
ground.
MOUNTING GUSSETS
(4 PLACES)
MOUNTING GUSSETS
(4 PLACES)
To Next Page
Loading...
