Maxon GPSLR Series - Page 34

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
34
UNBOLTING MOUNTING GUSSETS FROM
INSTALLATION PLATES
FIG. 34-1
HEX CAP SCREW,
3/8”-16 X 1-1/4” LG.
(4 PLACES)
LOCK NUT, 3/8”-16
(4 PLACES)
FLAT WASHER, 3/8”
(4 PLACES)
LH INSTALLATION
PLATE
4. Unbolt and remove mounting gussets from
installation plates on Liftgate. Discard
screws, washers and nuts (FIG. 34-1).
STEP 1 - INSTALLING LIFTGATE ON TRUCKS - Cont’d
RH INSTALLATION
PLATE
MOUNTING
GUSSET
(4 PLACES)
DRAFT 05-03-24