Maxon GPSLR Series - Page 53

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
53
7. Remove nut from negative (-)
battery terminal (FIG. 53-1).
Disconnect negative (-) battery
cable (FIG. 53-1).
DISCONNECTING (-) BATTERY CABLE
FIG. 53-1
NEGATIVE (-)
BATTERY TERMINAL
NEGATIVE (-)
BATTERY CABLE
RECONNECTING BATTERY CABLES
FIG. 53-3
POSITIVE (+)
BATTERY TERMINAL
POSITIVE (+)
BATTERY CABLE
NUT
NUT
8. Remove nut from positive (+)
battery terminal (FIG. 53-1).
9. Connect fused positive (+) cable
to positive (+) battery terminal
(FIG. 53-2). Then, reinstall nut
on positive (+) battery terminal
(FIG. 53-2).
10. Reconnect negative (-) battery
cable to negative (-) battery ter-
minal (FIG. 53-3). Next, con-
nect negative (-) cable to nega-
tive (-) battery terminal
(FIG. 53-3). Then, reinstall nut
on negative (-) battery terminal
(FIG. 53-3).
CONNECTING FUSED (+) CABLE
FIG. 53-2
POSITIVE (+)
BATTERY TERMINAL
FUSED (+)
CABLE
NEGATIVE (-)
BATTERY CABLE
NEGATIVE (-)
BATTERY TERMINAL
NUT
NUT
NEGATIVE (-)
CABLE
STEP 5 - CONNECT POWER & GROUND CABLES TO
J-BOX - Continued
NOTICE
Protect electrical connections on the
batteries and circuit breaker with a
corrosion preventative spray.
11. Ensure battery cable connections
are clean, tight, and protected from
corrosion.
DRAFT 05-03-24