mectron Starlight Pro - Identification Data; Identification Label of the Charging Unit; Identification Data of the Handpiece



2 IDENTIFICATIONDATA
A correct description of the model and of the serial number of the device will allow the After


2.1 IdenticationLabeloftheChargingUnit
) on which

placed to the underside of the equipment. The complete technical data are reported in Chapter
11 on page 25 .
NOTE: The complete list of symbols is reported in Chapter 9 on page 23.
Data Matrix HIBC 128
manufacturer
Mectron S.p.A.
via Loreto 15/a
Carasco -GE- Italy
YY000000
made in Italy
starlight pro
-CHARGER-
100-230 V~ 50/60 Hz 15 VA
00000000
YYYY-MM
Figure2 – 
2.2 IdenticationDataoftheHandpiece
        Chapter 9 on page 23 ) and the serial
number (see ).
NOTE: The complete list of symbols is reported in Chapter 9 on page 23.
Data Matrix HIBC 128
SN
YYYY-MM
starlight pro
000000000
03120000
Figure3 – 