mectron Starlight Pro - Descriptions of Commands and Signalling

11

4.3 DescriptionsofCommandsandSignalling
Table 1 at page 11.
Ref. Name Description
C
D
A B
A
Power LED
green
Indicates that the charging
unit is powered up.
B
Battery LED
green
Indicates that the battery is
being charged.
Battery LED
yellow
Indicates that the battery of
the has failed.
C
Test LED
green
Indicates that the light
intensity is suitable for

Test LED
yellow
Indicates that the light

D

button
Starts or stops a
polymerisation cycle.
Table1 – Descriptions of Commands and Signalling
Function Action/Button Acousticsignal
FAST
polymerisation
on/o button pressed for a
short time
1beep when the light
emission starts.
1beep on completion of


on/o button pressed for at
least 2 sec
1beep when the light
emission starts and 1 beep
after 2 sec.
1beep after 10 sec. of

1beep on completion of


cycle
on/o button pressed for
a short time during the

1beep