EasyManua.ls Logo

mectron Starlight Pro - Instructions for Use

mectron Starlight Pro
224 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...

USE
WARNING: Pointthebeamoflightdirectlyontothematerialtobepolymerised. Do
not subject the gum or other soft tissues to the beam of light (shield these parts suitably if

sector requiring clinical treatment..
WARNING:Do not short-circuit the electric contacts of the handpiece with metal objects
or liquids (Figure 6 at page 14 - Ref. A and Ref. B).
CAUTION: Duringtherstfewsecondsofexposureavoidcontactofthetipwiththe
materialtobepolymerised. Deposits of composite material adhering to and polymerised
to the tip terminal surface lower the amount of light transmitted and will therefore prejudice
subsequent polymerisation operations.
WARNING:

WARNING:
on the system.
6.3 InstructionsforUse

FAST
SLOWRISE

FASTexposureselection:
1. Table 1 at page 11 - Ref. D) for a short time.
An acoustic signal will be emitted (1 beep).
2. After 10 seconds an acoustic signal will be produced (1 beep). The FAST cycle has been
completed.
SLOWRISEexposureselection:
1. Table 1 at page 11 - Ref. D) for 2
seconds. An acoustic signal is emitted when the cycle starts and after 2 seconds.
2. After 10 seconds an acoustic signal will be emitted (1 beep).
3. 
been completed.

(Figure 4 at page 8 - Ref. B).
NOTE:Cycleinterruption.

Table 1 at page 11 - Ref. D).
NOTE:Additionalexposures.

Table 1 at page 11 - Ref. D).
Table 2 at page 12 and Table 3 at page 13.

Table of Contents

Related product manuals