21
3.
that the electric contacts are completely dry.
7.3 SterilisationProcedure
CAUTION:Carryoutsterilisationonlyinasteamautoclaveatamaximum
temperatureof135°for20minutes.
WARNING:The handpiece should not be sterilised.
WARNING:Infectionscontrol-Sterilisableparts. To avoid infection caused by bacteria
•
•
-6
by setting the parameters
indicated below:
• Type of cycle: 3 times Pre-vacum (pressure min. 60 mBar).
•
• Minimum sterilisation time: 4 minutes.
• Minimum drying time: 20 minutes.
All stages of sterilisation must be performed by the operator in compliance with the current
NOTE:
rinse with sterile water.
WARNING:
objects under a suitable light source. Pay particular attention to parts that may hide residue
integrity of those parts and elements that may have deteriorated during use.
To Next Page
Loading...
