12.2 General Information Displays (continued)
The instrument is cleaning the Open
Tube probe (needle). Please wait.
Every twelve hour the instrument
performs a wash of the system.
During wash cycle the instrument can
not be used for performing an
analysis.
The system has finished the count of
cells and displays the results. The
analysis cycle in not yet completed,
as the system still needs to perform
wash cycle for an accurate next
sample result. Please wait until the
[NEW SAMPLE] button is
activated. If probe was submerged in
next sample by mistake, perform a
background count before continuing
with the next analysis.
The printer is in the process of
printing. Please wait.
The analyzer is in the process of
transmitting serial output data. Please
wait.
Instrument displays this notice to
inform operator that ComboPack
reagents will soon need to be
changed. (See Section 2.5 for more
detail.)
To Next Page
Loading...