12.3 Warning Displays (continued)
The regular 12 hour wash has not
been performed. Check if reagent
containers are empty and if the
reagent detectors are in contact with
reagent.
The reagent container or containers
are empty. Check if the containers are
empty and if level sensors and reagent
contact plugs are inserted correctly.
This message is displayed if reagent
container or containers are empty
when coming out of Standby. Check
if the containers are empty and if
level sensors and reagent contact
plugs are inserted correctly.
ComboPack container needs to be
changed. Not changing reagents at
this time could cause erroneous
results or possible damage the
instrument. Connect new reagent
container and scan in barcode on
container. (See Section 2.5 for more
detail.)
Diluent container need to be changed.
Not changing reagents at this time
could cause erroneous results or
possible damage the instrument.
Connect new reagent container and
scan in barcode on container. (See
Section 2.5 for more detail.)
Lyse container needs to be changed.
Not changing reagents at this time
could cause erroneous results or
possible damage the instrument.
Connect new reagent container and
scan in barcode on container. (See
Section 2.5 for more detail.)
To Next Page
Loading...