Operating instructions for a round-belt conveyor system with vertical conveyor RF with VF
File: BA_RFmitVF_9750655_EN_2017-05.docx Update: 2018-04-10 9750655
Design and construction subject to change without prior notice!
MEIKO Maschinenbau GmbH & Co. KG, Englerstraße 3, D-77652 Offenburg, Tel.: +49 (0)781/203-0, Fax: +49 (0)781/203-1174
... the installation is only operated in perfect, operationally efficient condition, all protection
devices and cover panels are installed, and, in particular, that the safety systems and
switch elements are regularly checked for their operational efficiency.
... the required personal protective equipment is made available to and used by mainte-
nance and repair personnel.
... he operating instructions are always in a legible state, complete and available at the
installation's location of use.
... none of the safety and warning notices attached by the operator are removed and that
they are legible.
... suitable clothing is worn
Loose clothing and jewellery increase the risk of being caught on protruding parts.
Wear fitted work clothing. Wear full-length trousers or an apron.
Do not wear rings, necklaces or other pieces of jewellery.
Wear protective gloves and goggles.
Wear sturdy, suitable shoes. (We recommend wearing safety shoes with steel toe caps)
Parts carrying electric current as well as moving or rotating parts can cause·dangers to
the user’s life and limb and material damage. Do not reach into the machine while it is
running! Doing so could cause injury.
... the door to the vertical conveyor is locked, in
the case of walled-in conveyors with door ac-
cess. Only inducted personnel may use the key.
This space may not be otherwise used as a
store room, cupboard for cleaning supplies,
etc..
Observe the "CAUTION DANGER" warning
sign on the doors (order no.: 9552501) and do
not remove it.
To Next Page
Loading...
