Meiko RF - Default Chapter; Table of Contents

Operating instructions for a round-belt conveyor system with vertical conveyor RF with VF
File: BA_RFmitVF_9750655_EN_2017-05.docx Update: 2018-04-10 9750655
2/40
Design and construction subject to change without prior notice!
MEIKO Maschinenbau GmbH & Co. KG, Englerstraße 3, D-77652 Offenburg, Tel.: +49 (0)781/203-0, Fax: +49 (0)781/203-1174
Table of contents
Page
1 Introduction and general instructions ................................................................... 4
1.1 Safe keeping ......................................................................................................... 5
1.2 Name and address of manufacturer ..................................................................... 5
1.3 Description of model ............................................................................................. 5
2 Explanation of the safety symbols used ............................................................... 6
3 General description and intended use ................................................................. 7
3.1 General description .............................................................................................. 7
3.2 Intended use ......................................................................................................... 7
4 EC declaration of conformity ................................................................................. 8
4.1 EC Declaration of Conformity ............................................................................... 9
4.2 Declaration of Incorporation ............................................................................... 10
5 Technical specifications ....................................................................................... 12
6 General safety instructions .................................................................................. 12
6.1 Operator’s duty of care ....................................................................................... 12
6.2 Basic safety measures ....................................................................................... 14
6.3 Instructions – tray infeed station ......................................................................... 15
7 Assembly instructions (for a partially completed machine) ............................. 16
8 Delivery, transport, installation and assembly ................................................... 17
8.1 Delivery ............................................................................................................... 17
8.2 Transport ............................................................................................................ 17
8.3 Installation and assembly ................................................................................... 17
8.4 Instructions for the disposal of packing material ................................................ 18
9 Specific dangers .................................................................................................... 18
9.1 Accident protection at beginning of belt ............................................................. 18
9.2 Accident protection at the corner guide rollers ................................................... 18
9.3 Accident protection on the corners ..................................................................... 19
9.4 Cover panels on the vertical conveyor ............................................................... 19
10 Product description ............................................................................................... 20
10.1 Structure ............................................................................................................. 20
10.2 Control elements and details .............................................................................. 21
10.3 Check that all safety equipment is working ........................................................ 23
10.4 Height limitation, control panel with indicator light ............................................. 24
10.5 Turning back on after stopping due to operational needs .................................. 24
10.6 Special functions: queuing function .................................................................... 26
11 Operation ................................................................................................................ 27
11.1 Commissioning ................................................................................................... 27
11.2 Operation ............................................................................................................ 27
11.3 Tray infeed station (illustrations of improper loading) ........................................ 28