Operating instructions for a round-belt conveyor system with vertical conveyor RF with VF
File: BA_RFmitVF_9750655_EN_2017-05.docx Update: 2018-04-10 9750655
Design and construction subject to change without prior notice!
MEIKO Maschinenbau GmbH & Co. KG, Englerstraße 3, D-77652 Offenburg, Tel.: +49 (0)781/203-0, Fax: +49 (0)781/203-1174
8.4 Instructions for the disposal of packing material
The special square timber frame, consisting of untreated, raw pine/spruce wood, can
be used as firewood or as building wood for DIY projects.
The plastic sheeting (PE film) can be recycled.
The cardboard packaging material used to protect the edges can also be recycled.
9 Specific dangers
9.1 Accident protection at beginning of belt
If the accident protection system is removed from the beginning of the belt, this creates
the danger that someone reaching into the body of the round-belt conveyor from below
could have their hands caught and pulled inside, causing injury.
The photos show the position of the accident protection system and how it is assembled
at the top and bottom.
In order to avoid accident and injury, ensure that the accident protection system is not
removed.
9.2 Accident protection at the corner guide rollers
If the accident protection system is removed from the corner guide rollers, fingers are at
risk of being caught and injured.
The photos show the position and assembly of the accident protection system.
In order to avoid accident and injury, ensure that the accident protection system is not
removed.
Accident protection
system
Accident protection
system
Accident protection
system
Accident protection
system
Accident protection system
Accident protection system
Accident protection system
Accident protection system
To Next Page
Loading...