1 Introduction and general instructions
Dear customer,
We are delighted about the confidence you have shown in our products.
It is very important to us that you enjoy using MEIKO products and that they are extremely
useful to you, making your work easier.
If you follow the instructions in this document carefully, your conveying system will always
work to your complete satisfaction and have a long service life.
After assembly at our factory, this conveying system was thoroughly inspected. This gives
both you and us the assurance that you will always receive a trouble-free product.
We would therefore like to ask you to read these operating instructions carefully
before use. Any further related operating instructions for accessories and integrated
third-party products must be strictly observed!
These operating instructions are designed to familiarise the owner/operator of this installa-
tion with its set-up, modes of operation, use, safety instructions and maintenance.
The notes help you get to know the installation in detail and use it correctly. They also
enable you to avoid possible repairs and the loss of operational time that comes with them.
In the event of any damage caused by non-observance of these operating instructions, any
guarantee claims are invalid. We accept no liability for any additional damage caused as a
result.
MEIKO operates a policy of continuous development on all of its devices.
As a result of this, please understand that we reserve the right to make changes to the
scope of supply concerning the design, equipment and technical features at any time.
No claims may therefore be based on the details, the images or the descriptions contained
in these operating instructions.
Should you require any further information, or in case any particular problems should arise
that are not dealt with in great detail in the operating instructions, you can contact the rele-
vant MEIKO branch to obtain the information you require.
Further, we draw your attention to the fact that the content of these instructions does not
form part of a former or existing agreement, promise or legal relationship and does not
modify such a point.
All of MEIKO's obligations arise from the relevant purchase contract, which also contains
the entire and only valid guarantee provisions.
The operating instructions must be available in the local language for each EU country. If
this is not the case, the conveying system must not be commissioned.
The original operating instructions in German and all operating instructions in all languages
for EU countries can be downloaded at the following address: https://partnernet.meiko.de
Full technical documentation is provided free of charge. Additional copies are available for
a nominal fee.
These contractually guaranteed provisions shall be neither extended nor restricted as a
result of any explanations given in the instructions.
MEIKO wishes you much happiness and success.