10 Settings
46
Connection via FTP
ü
An FTP server or an FTP service is installed on the computer.
1. SelectConnection via FTP. The lower
pushbutton displays the current user data settings
(standard user name: Year of construction +
manufacture number; Password MELAG12345).
2. Press this pushbutton to change the pre-set TCP user
data. The display switches to the settings window.
3. Enter the user name and password and confirm
with SAVE.
Connection via TCP
ü
A suitable documentation software e.g. MELAtrace is installed.
1. SelectConnection via TCP. The TCP port
currently set is displayed on the lower pushbutton
(Standard TCP port: 65001).
To Next Page
Loading...
