FOCKE MELER GLUING SOLUTIONS TABLE OF CONTENTS
Installation requirements 3-1
Free space 3-1
Electrical Consumption 3-2
Compressed air 3-2
Other factors 3-3
Unpacking 3-3
Contents 3-3
Mounting the equipment 3-3
Electrical power connection 3-4
Pneumatic connection 3-4
Hose and applicator connection 3-5
Parameter Programming 3-5
Programming working temperatures 3-6
Selecting the overheating value 3-6
Keeping a component on display 3-7
External I/O connections 3-7
Temperature ok 3-8
External Standby 3-8
Low level (optional) 3-9
Output inhibitor 3-9
Starting up the motor (ok ext) 3-10
Motor speed set point reference (ref ext) 3-11
Failures output in pump control card 3-11
4. MELTER OPERATION 4-1
General information 4-1
Filling the tank 4-1
Starting up the melter equipment 4-2
To Next Page
Loading...