TABLE OF CONTENTS MA-5052-ENG MACRO SERIES MELTER MANUAL
Melter equipment displays 4-3
Displaying the temperature for each component 4-4
Alarm displays 4-5
Hot-melt display level (optional) 4-6
Display and adjustment of the working speed 4-6
Temperature adjustment 4-6
Programming the applicator parameters 4-7
Setting the clock 4-8
Programming the current day and hour 4-8
Programming equipment activation/deactivation 4-9
Disabling the equipment activation/deactivation program 4-10
Programming the equipment’s standby function activation/deactivation 4-11
Disabling the equipment standby function programming 4-12
Special function buttons 4-12
Pumping control 4-13
Starting up the pump control card 4-13
Pumping safety measures 4-14
Password security 4-15
LED indicators 4-15
Modes of operation 4-16
Mode of operation with internal pumping control and internal speed control 4-16
Mode of operation with internal pumping control and external speed control 4-17
Mode of operation with external pumping control and internal speed control 4-18
Mode of operation with external pumping control and external speed control 4-19
User configuration menu 4-21
Displaying alarms and reset function 4-21
Maximum rpm alarm 4-21
Minimum rpm alarm 4-22
Variator alarm 4-22
To Next Page
Loading...
Need help?
General