D33451 | Date 01/2018 19
Delivery, transport and setting up
3.6.2 Tilt protection
Due to its centre of gravity, the appliance can fall over to the front and injure you or other
people. Always attach the appliance to a wall with the tilt protection included in the delivery.
In case there is not enough space, do not put the appliance into operation and do not open
the door. Contact the Memmert service (see page 2).
1. Screw the tilt protection
onto the back of the ap-
pliance as illustrated.
2. Bend the tilt protec-
tion upwards by 90 ° in
the desired distance to
the wall (consider the
minimum distance to the
wall, see Fig. 8).
3. Drill a hole, insert a plug
and screw the tilt protec-
tion to a suitable wall.
To Next Page
Loading...
