Memmert ICO - Date and Time

D33451 | Date 01/2018 51
Menu mode
7.4 Date and time
In the TIME display, you can set the date and time, time zone and daylight saving time.
NOTICE
Always set the time zone (and daylight saving time yes/no) before you set the date and time.
Avoid changing the set time after that since this can lead to gaps or overlapping when record-
ing measured values. If you still need to change the time, you should not run a programme
immediately before or after doing so.
1. Activate the time setting. To do so, press
the activation key on the right side of
the
TIME display. The display is enlarged
and the first adjustment option (
Date)
automatically highlighted.
Date and time
Time
Time zone
Daylight savings
12.05.2012
12:00
GMT 01:00
Date
2. Turn the turn control until Time zone is
highlighted.
Time
Daylight savings
12.05.2012
12:00
GMT 01:00
Date
Time zone
3. Accept the selection by pressing the
confirmation key.
Time
Daylight savings
12.05.2012
12:00
GMT
Date
Time zone
01:00
4. Set the time zone of the installation site
with the turn control, e.g. 00:00 for
France, Spain or Great Britain and 01:00
for Germany. Accept the selection by
pressing the confirmation key.
Time
Daylight savings
12.05.2012
12:00
GMT
Date
Time zone
00:00
5. With the turn control, select the Daylight
savings
entry.
Time
12.05.2012
12:00
GMT 00:00
Date
Time zone
Daylight savings
6. Accept the selection by pressing the
confirmation key. The adjustment options
are highlighted.
Time
12.05.2012
12:00
GMT 00:00
Date
Time zone
Daylight savings