Memmert ICO - Protocol

60 D33451 | Date 01/2018
Menu mode
2. Save the selection by pressing the confir-
mation key. The adjustment options are
automatically highlighted.
Keysound
At the end
If door open
On alarm
Sound
3. With the turn control, select the desired
setting – in this example OFF ().
Keysound
At the end
If door open
On alarm
Sound
4. Save the setting by pressing the confir-
mation key.
If an acoustic alarm sounds, it can be
turned off by pressing the confirmation
key.
Keysound
At the end
If door open
On alarm
Sound
7.8 Protocol
The appliance continually logs all relevant measured values, settings and error messages at
1-minute intervals. The internal log memory is of the continuous memory type. The logging
function cannot be switched off and is always active. The measured data are stored in the
appliance, safe from manipulation. If the power supply is interrupted, the time of the power
failure and voltage recovery are stored in the appliance.
You can export the protocol data for different periods to a USB storage medium via the USB
interface or, via Ethernet, import them to the AtmoCONTROL software for graphical represen-
tation, print-out or storage.
The log memory of the appliance is not modified or deleted by reading it out.
1. Connect the USB storage medium to the
interface on the right side of the Control-
COCKPIT.
2. Activate the protocol. To do so, press the
activation key on the right side of the
PROTOCOL display. The display is en-
larged and the period
This Month is au-
tomatically highlighted. To select another
logging period, use the turn control.
Protocol
12.10.2012 12:00
c
ontrol range