Memmert ICO - User ID

D33451 | Date 01/2018 61
Menu mode
3. Save your selection by pressing the confir-
mation key. The transfer starts and a
status symbol indicates the progress.
Protocol
This Year
Complete control range
This Month
4. As soon as the transfer is complete, a
check mark appears in front of the period
selected. You can now remove the USB
storage medium.
Protocol
This Year
Complete control range
This Month
For a description of how to import and process protocol data in AtmoCONTROL or
read them out via Ethernet, please observe the separate AtmoCONTROL manual.
7.9 USER ID
7.9.1 Description
With the USER ID function, you can lock the settings of individual (e.g. temperature) or all
parameters, so that they cannot be changed at the appliance by accident or unauthorised
persons. You can also lock setting options in menu mode (e.g. adjustment or date and time
settings) this way.
If adjustment options are locked, this is indicated
by the lock symbol in the respective display (Fig.
31).
USER ID data is entered in the AtmoCONTROL software
and saved on the USB storage medium. The USB stor-
age medium is thus acting as a key: Parameters can
only be locked or unlocked if it is connected.
A description of how to create a USER ID in
AtmoCONTROL is provided in the separate AtmoCONTROL manual.
7.9.2 USER ID activation and deactivation
1. Connect the USB storage medium with
the USER ID data to the interface on the
right side of the ControlCOCKPIT.
22 .4
40 4
TEMP
Set
°C
°
C
Fig. 31 Temperature adjustment
at appliance locked (example)