Memmert ICO - Basic Operation in Menu Mode Using the Example of Language Selection

D33451 | Date 01/2018 47
Menu mode
7.2 Basic operation in menu mode using the example of language
selection
In general, all settings in menu mode are done just like in operating mode: Activate the
respective display, use the turn control for setting and press the confirmation key to accept
the change. A more detailed description is provided in the following, using the example of
language selection.
1. Activate the desired parameter (in this
example the language). To do so, press
the corresponding activation key on the
left or right of the respective display. The
activated display is enlarged.
ENGLISH
DEUTSCH
ESPANOL
FRANCAIS
If you want to exit or cancel the settings,
press the activation key you used to
activate the display again. The appliance
returns to the menu overview. Only the
settings that you have confirmed by
pressing the confirmation key before
cancelling the setting procedure are ac-
cepted.
SETUP
SIGNALTÖNE
CALIB
LANGUAGE
TIME
ON
O
O
ON
N
N
N
O
O
N
O
2. With the turn control, select the desired
new setting, e.g. Español (Spanish).
3. Save the setting by pressing the confir-
mation key.
ENGLISH
DEUTSCH
ESPANOL
FRANCAIS
4. To return to the menu overview, press the
activation key again.
SETUP
SIGNALTÖ
N
CALI
B
LANGUAGE
TIM
You can now
► activate another menu function by press-
ing the corresponding activation key or
► return to operating mode by pressing the
MENU key.
Balance
Einheit
IP Adresse
Alarm Temp
Timer Mode
Unit
IP address
Subnet mask
Alarm Temp
Timer Mode
ENGLISH
DEUTSCH
ESPANOL
FRANCAIS