Initiate Service Call
If your alarm system has been fitted with a modem it is possible for a master user to initiate
an upload sequence to a remote site (normally the alarm company). Once the
communication link is established, the remote site can read and write data from the
control panel.
User menu 2
Select Option :-
SYSTEM OPEN
17:30 01 JAN
Call Number 1
0181 12345678
SYSTEM OPEN
17:31 01 JAN
2 -
OPEN
OPEN
No. 1
A A A
1 1 1
2 2 2
3
4
3
4
3
4
LCD Remote St arburst Remote
LED Rem ote
? ? ? ?
ENT
+
ENT
ENT ENT ENT
? ? ? ?
ENT
+
ENT
? ? ? ?
ENT
+
ENT
1
= Call No.1
2
= Call No.2
3
= Call No.3
1
= Call No.1
2
= Call No.2
3
= Call No.3
1
= Call No.1
2
= Call No.2
3
= Call No.3
1. From the unset (open) mode enter your passcode and press [ENT] twice to select
user menu 2.
2. Whilst user menu 2 is selected. Press [A] to select the Initiate remote service call
option. If a low tone is heard your system does not have a modem fitted.
3. Press [1] - [3] to select call-back telephone number 1 -3.
4. When the display shows the required telephone number press [ENT] to initiate the
call-back sequence.
5. The system will automatically return to the open mode.
38
To Next Page
Loading...
