Mercusys MR50G User Manual

26
Chapter 5 Advanced Conguration
is necessary for your ISP. In most cases, leaving these elds blank will work.
• Access Concentrator Name - The access concentrator name should not be
congured unless you are sure it is necessary for your ISP. In most cases, leaving
these elds blank will work.
• Detect Online Interval - The router will detect Access Concentrator online at
every interval. The default value is 10. You can input the value between 0 and 120.
The value 0 means no detect.
• IP Address - The default setting is to get an IP address dynamically from your ISP.
If your ISP does not automatically assign IP addresses to the router, please select
Use the Following IP Address and enter the IP address provided by your ISP in
dotted-decimal notation.
• DNS Address - The default setting is to get an IP address dynamically from your
ISP. If your ISP does not automatically assign DNS addresses to the router, please
select Use the Following DNS Addresses and enter the IP address in dotted-
decimal notation of your ISP’s primary DNS server. If a secondary DNS server
address is available, enter it as well.
• Connection Mode - Select an appropriate connection mode that determines how
to connect to the internet.
• Auto - In this mode, the internet connection reconnects automatically any it
gets disconnected.
• On Demand - In this mode, the internet connection will be terminated
automatically after a specied inactivity period (Max Idle Time) and be re-
established when you attempt to access the internet again.
• Time-based - In this mode, the internet connection is only established in
a specic timeframe. If this option is selected, enter the start time and end
time. Both are in HH:MM format.
• Manual - In this mode, the internet connection is controlled manually by
clicking the Connect/Disconnect button. This mode also supports the Max
Idle Time function as On Demand mode. Enter a maximum time (in minutes),
the internet connection can be inactive before it is terminated into the Max
Idle Time. The default value is 15 minutes. If you want the internet connection
remains active all the time, enter 0 (zero).
Note:
Sometimes the connection cannot be terminated although you have specied the Max Idle Time because some applications
are visiting the internet continually in the background.

Mercusys MR50G Specifications

General

DSL WAN	No
Ethernet WAN	Yes
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	1900 Mbit/s
WLAN data transfer rate (first band)	600 Mbit/s
WLAN data transfer rate (second band)	1300 Mbit/s
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Number of guest networks (2.4 GHz)	1
Product type	Portable router
Product color	Black
Firewall security	IP and MAC Address Binding
Security algorithms	WPA-PSK, WPA2-PSK
Antennas quantity	6
Output current	1 A
Output voltage	12 V
Power source type	AC
Cables included	AC, LAN (RJ-45)
Package depth	267.5 mm
Package width	349.5 mm
Package height	80.5 mm
Package weight	760 g
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	157.2 mm
Width	175.6 mm
Height	45 mm