Multinorm/FonS/Poly
10
Notes!
• Do not use liquids based on petrol or hydrocarbons!
• Do not spill cleaning liquid over the instrument!
1.9 Service
For repairs under or out of warranty time please contact your Metrel distributor for
further information.
Name and address of manufacturer:
METREL d.d.
Ljubljanska cesta 77
SI-1354 Horjul
Tel.: +386 1 75 58 200, fax.: +386 1 75 49 226, +386 1 75 49 206
http://www.metrel.si
E-mail: metrel@metrel.si
1.10 Standards applied
The instrument conforms to the following standards:
EN 61010-1 Safety
EN 61326 EMC
DIN 5032 P1 Photometry; methods of measurement
DIN 5032 P2 Photometry; Operation of electric lamps and measurement
of the respective quantities
DIN 5032 P3 Photometry; Terms of measurement on gas luminaires
DIN 5032 P4 Photometry; Measurement of luminaires
DIN 5032 P6 Photometry; Photometers; Concepts, characteristics and
their designation
DIN 5032 P7 Photometry; Classification of illuminance meters and
luminance meters
EN 60751 Industrial platinum resistance thermometer sensors
EN 60584-1 Thermocouples - part 1: reference tables (IEC 60584-
1:1995);
EN 12599 Ventilation for buildings - Test procedures and measuring
methods for handling over installed ventilation and air
conditioning systems
EN ISO 7726 Ergonomic of thermal inviroment - Instruments for measuring
physical quantities
ISO 10526 CIE STANDARD colorimetric illuminants
ISO 10527 CIE STANDARD colorimetric observers
To Next Page
Loading...
Need help?
General
