Multinorm/FonS/Poly
24
In the Save menu one can still decide not to save the measurement record, or to
save it in different memory location. In that case the location name that was renamed in
Rename menu is not changed. Location is renamed only if a measurement record is
stored in it.
4.3 Recalling normal/multipoint measurement results
4.3.1 Results recall menu
Choose Results Recall/Clear option in Main menu and press the key to
enter the Results recall menu. Here one can set four different filters in order to select
which measurement records are recalled. It is possible to filter measurement records by
memory location levels (building, location), start date and stop date. Picture 4.4 shows
Results recall menu.
Picture 4.4: Memory recall menu
Move between four filters with the and keys. By pressing the F3 ( Fon )
key selected filter is enabled.
Select memory location with the
and keys (press and hold for fast rewind).
Setting start and stop date is a bit different and is shown in
Picture 4.5. First select start or stop filter with the
and keys. Then move to the
desired field with the or key. Once the field is selected change it with the and
keys. Parameter that is not inverted is being set, in this case the month.
By pressing the F2 ( Foff ) key the selected filter is disabled, meaning all
measurement records regardless of this filter will be found.
Picture 4.5: Setting start date
To Next Page
Loading...
Need help?
General
