Multinorm/FonS/Poly
25
4.3.2 Results find menu
By pressing the F4 ( Find ) key in Results recall menu, the instrument searches
for all measurement records according to filters and goes into Results find menu. Here
the results of the search are displayed. For every measurement record the memory
location where it was stored and the date of the measurement (start date) is displayed.
One can browse through results with the and keys. By pressing the F4 ( View ) key
the actual results of a stored measurement are displayed.
Picture 4.6: Results find menu
4.3.3 Results view menu
By pressing the F4 ( View ) in Results find menu, the actual results of recalled
measurement record are displayed. The display and the functionality of the keys are the
same as in normal measuring mode, except there are no F1 ( Hold ) and F4 ( Save )
keys.
Picture 4.7: Results view menu
4.3.4 Clearing measurement records
It is also possible to delete measurement records in Results find menu (Picture
4.6). Press the F2 ( Clear ) key to delete one selected measurement, or the F1 (C.All ) key
to delete all recalled measurement records.
To clear all measurement records set all filters to Filter Off with F2 ( Foff ) key in
Results recall menu and then use the F1 ( C.All ) key in Memory find menu. This can
also be done more easily in Results clear menu (described in chapter 5.4).
To Next Page
Loading...
Need help?
General
