Multinorm/FonS/Poly
15
Normal measuring mode has two sets of function keys. First set consists of Hold ,
Value , Single and Save , and the second set of Logger and some custom keys for
different parameters and probes.
For probe description and its connection to the instrument see user manual for
particular probe.
3.1.2 Displaying all parameters
To enter normal measuring mode select Measurements option in the Main
menu and press the key. Picture 3.2 shows display before the measurement is
started. The probes are already plugged in the corresponding measuring ports.
Measurements are stopped, which is indicated with stop icon and also with dashes
instead of values. All parameters that can be measured with currently connected probes
are in the main window.
Picture 3.2: Normal mode – microclimatic probe connected, measurements stopped
The instrument starts and stops measuring by pressing the key. The
instrument checks which probes are plugged-in approximately once every second. If a
new probe is plugged-in during the measurement, measurements are stopped and
reset.
Picture 3.3: Normal mode – microclimatic probe connected, measurements running
If there are no probes connected there is NO PROBE caption displayed in the main
window of the display (Picture 3.4).
To Next Page
Loading...
Need help?
General
