Metrohm 756 KF User Manual

4.2 Remote control commands
756/831 KF Coulometer, Instructions for Use
62
│ │ ├ .GenI Switching of generator I 100, 200, 400, auto ditto
│ │ ├ .Oven KF Oven connected COM1, COM2, no 4.2.2.20.
│ │ ├ .ActPulse Output of a pulse first, all, cond., OFF 4.2.2.21.
├ .Def Definitions for data output
│ ├ .Formulas Calculation formulas
│ │ ├ .1 for result 1
│ │ │ ├ .Formula Calculation formula special 4.2.2.22.
│ │ │ ├ .TextRS Text for result output up to 8 ASCII char ditto
│ │ │ ├ .Decimal Number of decimal places 0...2...5 ditto
│ │ │ ├ .Unit Unit for result output up to 6 ASCII char ditto
│ │ │ ├ .Limits Limits for result ON, OFF ditto
│ │ │ ├ .LoLim Lower limit 0...±999 999 ditto
│ │ │ ├ .UpLim Upper limit 0...±999 999 ditto
│ │ │ ├ .Output Output on L13 active, pulse, OFF ditto
│ │ │ : up to 9 results
│ ├ .SiloCalc Silo calculations
│ │ ├ .Assign Assignment
│ │ │ ├ .C24 Store as variable C24 RSX,H2O,CXX 4.2.2.23.
│ │ │ ├ .C25 Store as variable C25 RSX,H2O,CXX
│ │ ├ .MatchId Matching of Id's id1, id1&2, all, OFF
│ ├ .ComVar Assignment of common variables
│ │ ├ .C30 for C30 RSX,H2O,CXX,MNX 4.2.2.24.
│ │ ├ up to C39
│ ├ .Report Reports at the end of determination
│ │ ├ .Internal Output to internal printer (only 756) special 4.2.2.25.
│ │ ├ .Assign1 Output to COM1 special
│ │ ├ .Assign2 Output to COM 2 as COM1
│ ├ .Mean Assignment for mean calculation
│ │ ├ .1 MN1
│ │ │ ├ .Assign Input of variable RSX, H2O, CXX 4.2.2.26.
│ │ │ :
├ .CFmla Calculation constants
│ ├ .1 Calculation constant C01
│ │ ├ .Value Input of value 0...±999 999 4.2.2.27.
│ ├ up to C19

Metrohm 756 KF Specifications

General

Brand	Metrohm
Model	756 KF
Category	Measuring Instruments
Language	English