Metrohm 756 KF User Manual

4.2 Remote control commands
756/831 KF Coulometer, Instructions of Use
65
│ │ ├ .Time Time XX:XX
│ ├ .RunNo Run number 0...9999 4.2.2.43.
│ ├ .OpLevel Operator level standard, expert 4.2.2.44.
│ ├ .StartDelay Start delay time 0...999 999 4.2.2.45.
│ ├ .ResDisplay Result display standard,bold 4.2.2.46.
│ ├ .DevName Device label 8 ASCII char. 4.2.2.47.
│ ├ .Beep Beeper 1...3, OFF 4.2.2.48.
│ ├ .DisplayMeas Display of measured values ON, OFF 4.2.2.49.
│ ├ .Prog Program version read only 4.2.2.50.
│
├ .RSSet1 Settings RS232, 1 $G 4.2.2.51.
│ ├ .Baud Baud rate 300,600,1200,2400,4800,
│ │ 9600 ditto
│ ├ .DataBit Number of data bits 7, 8 ditto
│ ├ .StopBit Number of stop bits 1, 2 ditto
│ ├ .Parity Parity even, odd, none ditto
│ ├ .Handsh Handshake HWs, SWchar,
│ │ SWline, none ditto
├ .RSSet2 as for RS1
│
├ .Report Report configuration 4.2.2.52.
│ ├ .Id Print report id ON, OFF ditto
│ ├ .Instr Print line with instrument id ON, OFF ditto
│ ├ .DateTime Print line with date/time ON, OFF ditto
│ ├ .Run Print run number ON, OFF ditto
│ ├ .Method Print line with method id ON, OFF ditto
│ ├ .Sample Print line with sample size ON, OFF ditto
│ ├ .Drift Print line with drift correction ON, OFF ditto
│ ├ .TitrTime Print line with titration time ON, OFF ditto
│ ├ .EPH2O Print line with H2O in ug ON, OFF ditto
│ ├ .Statistics Print current statistics data ON, OFF ditto
│ ├ .Visum Print line for visum ON, OFF ditto
│
├ .ComVar Values of common variables
│ ├ .C30 C30 0... ±999 999 4.2.2.53.
│ ├ up to C39 0... ±999 999

Metrohm 756 KF Specifications

General

Brand	Metrohm
Model	756 KF
Category	Measuring Instruments
Language	English