5.2 The keyboard
774 Oven Sample Processor, Instructions for use
47
Key Normal state Editing
Turn rack right
• The <Î> key turns the sam-
ple rack one position to the
right, i.e. in the clockwise di-
rection. The next lowest
beaker position is placed un-
der the lift.
• The turning speed of the rack
can be defined in the Parame-
ter Menu or with the <DEF>
key.
• The rotation of the rack can
only be carried out when the
lift is at or above the turning
position
Move the cursor one column to
the right
• With the <Î> key the cursor
is moved one column to the
right in an editing line with two
parameters.
• Any data which has been al-
tered will not be carried over
during this action. See
<ENTER> key
INSERT
Add a command line to a se-
quence
• Adds a new command line
before the current line in a
sequence. The “NOP” com-
mand (no operation) automati-
cally occupies this line and has
no function.
• The lines following this line are
shifted one line downwards.
DELETE
Delete a command line in a
sequence
• Deletes the current line in a
sequence
• The lines which follow shift
upwards by one line.
To Next Page
Loading...
