Metrohm 774 - The Remote Control Tree; Overview; Mode

5 Detailed description
774 Oven Sample Processor, Instructions for use
106
5.10 The remote control tree
5.10.1 Overview
The internal object tree can be divided into the following branches:
& Root
├ Mode Method parameters
├ Config Instrument configuration
├ Info Current Data
├ Setup Setting the operating mode
├ UserMeth User-defined methods
├ Assembly Component data
└ Diagnose Diagnostics program
Detailed Description of the Main Branches:
5.10.2 &Mode
Object Description Input range Reference
& Root
├ Mode Method parameters $G, $S, $H, $C 5.11.1.1
: ├ .Method Method name 8 ASCII characters 5.11.1.2
├ .SmplNo Number of samples in a series 1...999, ∗, Rack 5.11.1.3
│
├ .StartSeq Start sequence - 5.11.1.4
│ ├ .1 Line number of the command -
│ │ ├ .Cmd Command nop, MOVE, LIFT, 5.11.1.5
│ │ └.∗ SAMPLE, HEATER, DEF
│ │ FLOW, DOS, SCAN,
│ ∗ CTRL, WAIT, RACK
│ :
│ └ .100 Sequence end NOP
│
│
├ .SampleSeq Sample sequence - 5.11.1.6
│ ├ .1 Line number of the command -
│ │ ├ .Cmd Command nop, MOVE, LIFT, 5.11.1.7
│ │ └. ∗ SAMPLE, HEATER, DEF
│ │ FLOW, DOS, SCAN,
│ ∗ CTRL, WAIT, RACK
│ :
│ └ .100 Sequence end NOP
│
: