5 Detailed description
774 Oven Sample Processor, Instructions for use
54
Key Normal state and editing
• DEF commands are valid for manual operation as well as for the
programmed processing of a method.
• The individual DEF commands are listed below.
0
DEF
DOSRATE
Change dosing rate
• The dosing rate may be individually set for every dosing drive (Do-
simat or Dosino).
• Syntax: DOSRATE [Dosing unit] [Dosing rate]
0
DEF
FILLRATE
Change filling rate
• The filling rate may be set individually for every dosing drive (Dosi-
mat oder Dosino).
• Syntax: FILLRATE [Dosing unit] [Filling speed]
0
DEF
LIFTRATE
Change lift speed
• The lift speed can be set at will.
• Syntax: LIFTRATE [Tower] [Lift speed]
To Next Page
Loading...
