5 Detailed description
774 Oven Sample Processor, Instructions for use
56
Key Normal state Editing
.
<
PRINT
Print report
• The <PRINT> key serves for
the manual printout of reports.
• The choice of printer type and
the parameters of the RS232
interface must be done in the
Configuration Menu unter
“>RS232 Settings”.
Text entry
• In a menu or sequence line in
which entry of text is required,
(for ex. method name), text edit
mode is activated with "<".
• Existing text is deleted in this
event and the text cursor is set
on the left margin of the text
field.
• "<" serves also for shifting the
chain of characters to chose
from, i.e. the text cursor is
shifted one place to the left for
each instance. See page 60.
>
*
RAC K
-
Initialise sample rack
• The changer can be initialised
with key <RACK>. The con-
nected peripherals (e.g. Do-
simats or Dosinos) are not af-
fected by this.
• Once a method has been
loaded, it is retained. Sample
rack and lift are moved to ini-
tial position and automatic
rack detection is performed.
The rack can be removed in
the basic position.
Text entry
• In a menu or sequence line in
which entry of text is required,
(for ex. method name), text edit
mode is activated with ">" .
• Existing text remains in this
event and the text cursor is set
at the end of the existing char-
acter string.
• ">" serves also for shifting the
chain of characters to chose
from, ie. the text cursor is
shifted one place to the right
for each instance. See page
60f.
To Next Page