Metrohm 774 - Page 72

5 Detailed description
774 Oven Sample Processor, Instructions for use
66
>dosing units 1
max. rate 1 160 ml/min
Max. dosing speed (depends on bu-
rette size)
0.01…160 ml/min
>dosing units 1
tube length 1 1000 mm
Length of the tubing on Dosino port 1
0, 1000, 30000 mm
>dosing units 1
tube diameter 1 2 mm
Diameter of the tubing on Dosino port
1
0.1…2.0…20 mm
>dosing units 1
max. rate 2 160 ml/min
Max. dosing speed (dependends on
burette size)
0.01…160 ml/min
>dosing units 1
...........................until Port 4
Enter the tubing diameter for all four
ports of a Dosino
Only the dosing speed is relevant for the 685 Dosimat; the other parameters
are ignored.
Configuration
>RS232 settings
Submenu for the serial interface parameters
Open the submenu with <ENTER>
>RS232 settings
Baud Rate: 9600
Transmission speed in baud
300,600,
1200,2400,
4800,9600
>RS232 settings
data bit: 8
Number of data bits
7,8
>RS232 settings
stop bit: 1
Number of stop bits
1,2
>RS232 settings
parity: none
Parity selection
even, odd, none
>RS232 settings
handshake: HWs
Handshake selection
HWs,HWfull,
SWchar,SWline,
none
>RS232 settings
character set: IBM
Character set for printer or PC
IBM,HP,Epson,
Seiko,Citizen
use
<QUIT>
to access the
n
ext highes
t
level
use
<QUIT>
to access the
n
ext highes
t
level