2247LHZ EM-9517-B Rev.10
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
■ REMOVING TERMINAL COVER
(a) Insert the minus tip of a screwdriver into a hole at the lower left corner of the cover.
(b) Pull the handle upward.
(c) Then insert the screwdriver into a hole at the lower right corner.
(d) Pull the handle upward to separate the terminal cover.
Terminal cover
(a)
(b)
(c)
(d)
To Next Page
Loading...
