5247LHZ EM-9517-B Rev.10
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
6. PARAMETER CONFIGURATION
■ MODE
Parameters can be grouped in several modes.
The 47LHZ has modes as shown in the following table.
MODE FUNCTION MEASUREMENT
Measuring Normal measurement state where the unit takes in input and provides alarms.
Present value, MAX and MIN values, alarm setpoints can be indicated in Measuring-
Mode. When the power is supplied, the unit operates in Measuring Mode.
Measuring
Scaling Setting Basic settings such like input type, input scaling and display scaling, and also analog
output function and analog output adjustments can be performed.
Measuring stopped
Alarm Setting Alarm setpoints, trip action, deadband and ON delay time can be set.
Advanced Setting Brightness, automatic return time to Measuring Mode and transition time to Lockout
Setting Mode can be set. Also the rmware version can be conrmed.
Lockout Setting Settings to prevent inadvertent button operation can be performed. Mode transition
and set values can be locked.
Loop Test Output Simulated measured value can be set to perform output test.
To Next Page
Loading...
