10447LHZ EM-9517-B Rev.10
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
■ INPUT SPECIFICATIONS
Input voltage Max. 300 V (conformance range 50 – 300 V)
Overload capacity 450 V for 10 seconds, 360 V continuous
Measuring range Input type: H50 45 – 55 Hz
Input type: H60 55 – 65 Hz
Input type: H55 45 – 65 Hz
Input type: H400 350 – 450 Hz
Input type: HF 10 – 500 Hz
Operational range Input type: H50 40 – 60 Hz
Input type: H60 50 – 70 Hz
Input type: H55 40 – 70 Hz
Input type: H400 300 – 500 Hz
Input type: HF 5 – 600 Hz
Input burden ≤ 0.5 VA
■ OUTPUT SPECIFICATIONS
DC output DC current Load resistance
(output range)
4 – 20 mA DC: ≤ 550 Ω
0 – 20 mA DC: ≤ 550 Ω
Operational range -5 – +105%
DC voltage Load resistance
(output range)
0 – 10 V DC: ≥ 10 kΩ
0 – 5 V DC: ≥ 5000 Ω
1 – 5 V DC: ≥ 5000 Ω
-10 – +10 V DC: ≥ 10 kΩ
Operational range -5 – +105%
Alarm output Relay contact
Rated load: 250 V AC @ 3 A (cos ø = 1)
30 V DC @ 3 A (resistive load)
Maximum switching voltage: 250 V AC, 30 V DC
Maximum switching power: 750 VA, 90 W (resistive load)
Minimum load: 5 V DC @ 10 mA
Mechanical life: ≥ 5 × 10
6
cycles (rate 180 cycles/min.)
■ INSTALLATION
Power consumption AC power 100 – 240 V AC Operational voltage range 85 – 264 V AC, 50/60 Hz
Approx. 6.5 VA
DC power 24 V DC Operational voltage range 24 V DC ±10%
Ripple 10% p-p max.
Approx. 3 W
110 V DC Operational voltage range 85 – 150 V DC
Ripple 10% p-p max.
Approx. 3 W
Operating temperature -10 to +55°C (14 to 131°F)
Operating humidity 30 to 90% RH (non-condensing)
Mounting Panel ush mounting
Weight 300 g (0.66 lb)
To Next Page
Loading...
