7847LHZ EM-9517-B Rev.10
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
9.1 OPERATING PROCEDURE
NOTE
The following gures are display examples. The displays
depend on the settings.
1
Hold down Alarm/↓ and Scale/↑ buttons at once for 3 seconds
or more to move on to Advanced Setting Mode.
• The brightness is indicated.
• ‘D/P’ and ‘Fnc’ indicators turn on.
NOTE
‘C 1’, ‘C 2’, ‘C 3’, ‘C 4’ or ‘C 5’ is indicated depending on the setting.
2
Press Shift or Up button to select.
• Select one among ‘C 1’, ‘C 2’, ‘C 3’, ‘C 4’ and ‘C 5’.
3
Press Alarm/↓ or Scale/↑ button to apply the new setting.
• And the next parameter setting is indicated.
NOTE
• Press Alarm/↓ button, and the automatic return time to Measuring Mode will be indicated within the range of ‘R 00’ to ‘R
99’ depending on the setting.
• Press Scale/↑ button, and the version indication will be indicated.
4
Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode.
1,3,
4
1,3,
2
2
Blinking
To Next Page
Loading...
