6847LHZ EM-9517-B Rev.10
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
3
Press Shift or Up button to select ‘LMHI’.
4
Press Alarm/↓ or Scale/↑ button to apply the new setting.
• And the next parameter setting is indicated.
NOTE
• Press Alarm/↓ button, and the LL (L, H or HH) deadband will be indicated within the range of 0000 to 9999 depending
on the setting.
• Press Scale/↑ button, and the LL (L, H or HH) alarm setpoint will be indicated within the range of -19999 to 19999 de-
pending on the setting.
5
■ TO GO ON TO SET ANOTHER TRIP ACTIONS,
Repeat operation from Step 2.
■ TO SET THE NEXT PARAMETER,
Skip to Step 2 in “8.4 DEADBAND”.
■ TO QUIT,
Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode.
Blinking
To Next Page
Loading...
