MG 47 Series - Page 76

7647LHZ EM-9517-B Rev.10
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
3
Press Shift or Up button to select.
• Select one among ‘B 0’, ‘B 1’, ‘B 2’, ‘B 3’ and ‘B 4’.
4
Press Alarm/↓ or Scale/↑ button to apply the new setting.
• And the next parameter setting is indicated.
NOTE
• Press Alarm/↓ button, and the alarm point ‘ALM2’ or ‘ALM4’ will be indicated depending on the specications and setting.
• Press Scale/↑ button, and the HH or H coil at alarm ‘RYEN’ or ‘RYDN’ will be indicated depending on the setting.
5
Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode.
Blinking