9847LHZ EM-9517-B Rev.10
MG CO., LTD. www.mgco.jp
5-2-55 Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
8
Press Alarm/↓ or Scale/↑ button to register the analog output 100% adjustment.
• The analog output 100% adjustment is registered.
• The next parameter is indicated.
NOTE
• Press Alarm/↓ button, and the input type will be indicated.
• Press Scale/↑ button, and the analog output 0% adjustment ‘ADJ’ will be indicated.
9
Hold down Alarm/↓ or Scale/↑ button for 1 second or more to return to Measuring Mode.
To Next Page
Loading...
