MGI DNBSEQ-G400 - System Settings Interface; Maintenance Interface

Control software
25
System settings interface
You can change system settings in this interface.
To open the system settings interface, perform the following steps:
1. Log in to your account.
2. Tap and select Settings.
The following table describes the function of controls in the
interface:
Item Description
Back
Tap to exit the system settings interface and return to the
previous interface.
Language
Tap to change the language of the software. Restart the
device to apply the changes.
Upload
Select Upload enabled to upload the data to the specified
server.
Customize
Tap to change the wait time before the screen locks
automatically. Move the slider to change the volume of
the buzzer.
Maintenance interface
You can maintain the device, import or export the data, and import
barcode in this interface.
To open the system maintenance interface, perform the following
steps:
1. Log in to your account.
2. Tap and select Maintenance.
The following table describes the function of controls in the
interface:
Item Description
Back
Tap to exit the system maintenance
interface and return to the previous
interface.