MGI DNBSEQ-G400 - Loading the Reagent Cartridge

Loading the reagent cartridge
39
Loading the reagent cartridge
Step1 Step2
A Status: Preparing
Sequencing cartridge XXXXXXXXXX
Previous
Next
A
C
T
G
20.0°C
Figure 13 Reagent cartridge loading interface
Perform the following steps:
1. Place the prepared reagent cartridge close to the device.
For details on preparing the reagent cartridge, refer to the
relevant reagent kit user manual.
2. Tap the Sequencing cartridge ID box.
3. Scan the QR code on the reagent cartridge or on the packaging.
The interface is presented as an illustration. Actual location of the QR code
might vary.