Device overview
26
Item Description
Device
maintenance
Empty
fluidics line
Tap to discharge the residual liquid in
all fluidics lines to the waste container.
The fluidics line that is being emptied is
highlighted.
Self-test
Tap to perform a self-test for the
hardware of the device. The result of each
item is displayed in the interface. After
self-test, you will be prompted that the
self-test is successful.
Clear
history data
Tap to clear all history data of sequencing
runs, except for the data of the most
recent run.
Device
maintenance
Export data
z
Select a data type and export the
data to the specified directory of the
external storage device.
z
Select Uploading data and upload the
data to the specified server.
Barcode
settings
Import
barcode
Import the barcode that is saved in the
external
storage device to the device.
Shutdown or restart interface
You can shut down or restart the system in this interface.
To open the shutdown or restart interface, perform the following
steps:
1. Tap and select Shut down from the selection menu.
2. Tap Shut down to turn off the device, or tap Restart to restart the
device.
About interface
You can view the software version, serial number of the device, and
the manufacturer information in this interface.
To open the about interface, perform the following steps:
1. Tap to display the selection menu.
2. Tap About in the selection menu.
To Next Page
Loading...