Performing a pre-run wash
37
4. Log in to the control software with the user name and password
that are provided by the manufacturer.
Performing a pre-run wash
Before each sequencing run, perform a regular wash to flush
impurities out and to empty the fluidics line. For details, refer to
Performing a regular wash on Page 47
.
Loading DNBs
DNB ID: XXXXXXXX
Recipe:
Step1 Step2
A
Status: Preparing
A B
Back Next
+
1~128
DNB loading
A
C
T
G
20.0°C
Figure 11 DNB loading interface
Perform the following steps:
1. In the main interface, tap Sequence to enter the DNB loading
interface.
You can tap Back to return to the main interface.
2. Tap the DNB ID box.
3. Scan the QR code on the tube.
To Next Page
Loading...