4 Instructions SL1
The following example of a typical SL1 application will serve to clarify a few terms and aspects of a gate automation system:
A) KS1 key-operated selector switch.
B) Pair of PH1 photocells
C) FL1 flashing light with incorporated aerial.
D) Pair of PT50 posts for photocells (not included).
E) Mechanical stop in closing cycle
F) Ground guide (track)
G) Opening limit switch bracket.
H) CR100 rack (not included).
I) SL1K gearmotor complete with control unit.
J) Closing limit switch bracket.
2.2 Description of the automation
A
D E G H
I
D
B B C
Figure 1
2 Product Description
2.1 Applications
SL1 is a set of components designed for the automation of sliding gates
in residential applications.
Any applications other than those described above or under
different conditions from those specified in this manual are
forbidden.
SL1 operates with electric power. In the event of a power failure, the
gearmotor can be released using suitable keys in order to move the gate
manually. Alternatively, the PR1 buffer battery (optional accessory) can
be used.
F
J
To Next Page
Loading...
