EasyManua.ls Logo

MHSC CDVR33 - ; Product Features; Code Approval

Default Icon
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
69D0023 5
CDV Series Gas Fireplace
PRODUCT FEATURES and CODE APPROVAL
Off/Pilot/On Knob
Remote Control
Figure 1 - CDVR Series and CDVT Series Fireplace
This appliance has been certied for use with either natural or propane gas. See appropriate data plates.
This appliance is not for use with solid fuels.
The appliance is approved for bedroom or bedsitting room installations.
The appliance must be installed in accordance with local codes if any. If none exist use the current installation
code. ANSI Z223.1/NFPA 54 in the USA, CSA B149 in Canada.
This appliance is mobile home approved.
The appliance must be properly connected to a venting system.
The appliance is not approved for closet installations.
This appliance is approved to be vented with Simpson-Duravent and Selkirk-Metalbestos Direct Vent Com-
ponents.
NOTE: For illustration purposes only, all drawings show the Simpson-Duravent System.
Hi/Lo Knob
PRODUCT SPECIFICATIONS
CODE APPROVAL
Direct Vent type appliances draw all combustion air from outside of the dwelling through the vent pipe.
These appliances have been tested by CSA and found to comply with the established standards for DIRECT
VENT GAS FIREPLACE HEATERS in the USA and Canada as follows:
LISTED VENTED GAS FIREPLACE HEATER
TESTED TO: ANSI Z21.88/CSA 2.33 STANDARDS
A manufactured home (USA only) or mobile home OEM installation must conform with the 
Construction and Safety Standard, Title 24 CFR, Part 3280, or when such a standard is not applicable, the
   , or Standard for Gas Equipped
.
Blower Control
On/Off/RS Switch
Ignitor

Table of Contents

Related product manuals